Home > Category > Poly Aluminium Chloride (PAC) > PAC for Drinking Water Treatment > Poly Aluminium Chloride PAC for Waste Water Treatment
Contact Us
Shandong Welldone Environmental New Materials Co.,Ltd..
Contacts: Jack Ma
Phone: +86-17664031716
E-mail: info@welldonechina.com
Website: www.polyacrylamidechina.com Contact Now
News
Poly Aluminium Chloride PAC for Waste Water Treatment

Poly Aluminium Chloride PAC for Waste Water Treatment

  • Specification             Analysis Results
  • Aluminium oxide(Al2O3) % 30%-31%
  • Basicity%                 60-80%
  • PH (1% aqueous solution) 3.5-5.0
  • Water insoluble %         0,2max
  • Nitrogen                ≤0.01
  • (As)/%                        0.0002
  • (Pb)/%                        0.001
  • (Cd)/%                        0.0002
  • (Hg)/%                        0.00001
  • (Cr+6)/%                0.0005
1.Product and Description : polyaluminium chloride (PAC)
The product is high-efficient ,cheap and nontoxic inorganic high molecular compound .It's easily soluble in water .In the hydrolytic process ,it is accompanied with the chemical processes such as electrochemistry ,coagulation ,absorption and precipitation .The product has the features including wide applicable range of PH value ,large granule ,and quick speed in sedimentation .It's widely used in treating the domestic drinking water ,domestic sewage and industrial waste water .
2. Product Performance  : light yellow power (solid )
3. Product Advantages:
1). Flocculation ability, high adsorption activity, floc formation and deposition of fast 
2). Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation
3). easy to use and good effective 
4. Usage :Widely applied for treating the domestic drinking water ,domestic sewage and industrial waste water .
5. Storage: The products shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunlight .
6.Application method:
The liquid product can be used directly or used after dilution.
Dilution is necessary before used for the solid product. The normal dilution ratio for the solid product is 5%-15%.


Shandong Welldone Environmental New Materials Co.,Ltd.

Tel:+86-17664031716

Contact Person:Jack Ma

PDF Show:PDF

Send Inquiry
captcha